pauseplay
/
show/hideshow/hide

Back to Diamond & CBN Grinding Wheels

Super Grinder (UDGW)

ALUMINUM CORE !!!

Description & Use:
STRAUSS & CO.’s Super-Grinder wheel is plated with diamond grains, to be used on any bench grinding machine. Commonly adapted on one side of the machine while a conventional grinding wheel is adapted on the other side. This allows the user to grind a wider spectrum of materials. For the grinding and sharpening of tools made of tungsten carbide, HSS and hardened materials. Minimum RPM = 1500 RPM (for Ø150 mm) Maximum RPM = 6500 RPM (for Ø150 mm)

  • Supplying a comprehensive solution for grinding materials of 40hrc and harder.
  • Low weight-protects the axes of the machine.
  • Aluminum core reduces the grinding temperature - no need for coolant.
  • No need for dressing.
  • Wheel's diameter is not reduced during the entire wheel's life.
  • No dust generated - keeps the work place clean.
mm sizes
Cat.No.DTW1W2H
SG-01 150 25 15 0 20
SG-05 150 25 15 15 20
SG-10 150 25 25 0 20
SG-15 150 25 25 25 20
SG-20 200 25 15 0 20
SG-25 200 25 15 15 20
SG-30 200 25 25 0 20
SG-35 200 25 25 25 20
SG-40 150 13 13 13 31.75
inch sizes
Cat.No.DTW1W2H
SG-02 6" 1" 0.590" 0 1"
SG-06 6" 1" 0.590" 0.590" 1"
SG-11 6" 1" 1" 0 1"
SG-16 6" 1" 1" 1" 1"
SG-21 8" 1" 0.590" 0 1.25"
SG-26 8" 1" 0.590" 0.590" 1.25"
SG-31 8" 1" 1" 0 1.25"
SG-36 8" 1" 1" 1" 1.25"
SG-41 6" 1/2" 1/2" 1/2" 1.25"

Grit Size:
Available in D or B54 (#270/325), D or B91 (#170/200), D or B126 (#120/140), D or B181 (#80/100), D or B252 (#60/80), D or B427 (#40/50).

Remarks:
The aluminium plated wheels are available in different shapes. Hole size: upon request.