Back to Diamond & CBN Internal Grinding Pins
GT Grinding Pins With Tungsten Carbide Shank
Description & Use:
STRAUSS & CO.'s GT pins have all the advantages and features described in page 32 in our catalog. All GT pins are plated on a tungsten carbide shanks. This minimizes the vibrations to almost vibration's free grinding. The result is an extra precise grinding.
| Cat. No. | Description | Min order | ||||
|---|---|---|---|---|---|---|
| D | T | L1 | Y | L | ||
| GT2.0-05 | 2.0 | 5 | 12 | 3 | 55 | 20 |
| GT2.3-50 | 2.3 | 3 | 2 | 50 | 20 | |
| GT2.3-75 | 2.3 | 3 | 2 | 75 | 20 | |
| GT2.5-05 | 2.5 | 5 | 16 | 3 | 55 | 20 |
| GT3.0-05 | 3.0 | 5 | 16 | 3 | 55 | 20 |
| GT3.3-50 | 3.3 | 4 | 3 | 50 | 20 | |
| GT3.3-75 | 3.3 | 4 | 3 | 75 | 20 | |
| GT3.5-05 | 3.5 | 5 | 3 | 55 | 20 | |
| GT4.0-05 | 4.0 | 5 | 3 | 55 | 20 | |
| GT4.0-15 | 4.0 | 5 | 20 | 6 | 60 | 10 |
| GT4.3-50 | 4.3 | 5 | 4 | 50 | 20 | |
| GT4.3-75 | 4.3 | 5 | 4 | 75 | 20 | |
| GT4.5-01 | 4.5 | 5 | 3 | 55 | 20 | |
| GT5.0-01 | 5.0 | 6 | 3 | 55 | 20 | |
| GT5.0-05 | 5.0 | 6 | 20 | 6 | 60 | 10 |
| GT5.3-50 | 5.3 | 5 | 5 | 50 | 10 | |
| GT5.3-75 | 5.3 | 5 | 5 | 75 | 10 | |
| GT5.3-100 | 5.3 | 5 | 5 | 100 | 10 | |
| GT6.0-05 | 6.0 | 8 | 20 | 6 | 60 | 10 |
| GT6.0-10 | 6.0 | 8 | 30 | 6 | 80 | 10 |
| GT6.3-50 | 6.3 | 7 | 6 | 50 | 10 | |
| GT6.3-75 | 6.3 | 7 | 6 | 75 | 10 | |
| GT6.3-100 | 6.3 | 7 | 6 | 100 | 10 | |
| GT8.0-01 | 8.0 | 10 | 6 | 60 | 10 | |
| GT8.0-15 | 8.0 | 10 | 30 | 8 | 100 | 5 |
| GT8.3-75 | 8.3 | 10 | 8 | 75 | 10 | |
| GT8.3-100 | 8.3 | 10 | 8 | 100 | 10 | |
| GT10-05 | 10 | 10 | 6 | 60 | 10 | |
| GT10-20 | 10 | 10 | 30 | 10 | 100 | 5 |
| GT12-05 | 12 | 10 | 6 | 60 | 10 | |
| GT12-20 | 12 | 10 | 10 | 100 | 5 | |
| GT15-01 | 15 | 10 | 6 | 60 | 10 | |
| GT15-20 | 15 | 10 | 10 | 100 | 5 | |
Grit Size: Available in D or B91 (#170/200),D or B126 (#120/140), D or B181 (#80/100). Other grit sizes are available upon request.
Remarks:
Tolerance: D= ±0.15 mm, T= ±1.0 mm, L1= ±1.0 mm, Y= h6, L= ±1.0 mm.
Please see additional items in page 37
