Back to Diamond & CBN Internal Grinding Pins
HP Hand Pieces
Description & Use:
STRAUSS & CO.'s HP range of burs is available for profile grinding where a non-cylindrical shape is required. Available in 29 different shapes, which are widely used in hand grinders for grinding and deburring applications. Also used in dental and jewelry industries.
Size: Total length 44.5 mm. Shank (Y) Ø3.00 mm. or Ø2.35 mm. When ordering please indicate shank Ø.
Example For Order: H11=shank Ø2.35 mm. H113=shank Ø3.00 mm.
| Cat.No. | D1 | D2 | T | ||
|---|---|---|---|---|---|
| Ball |  |
H11 | 1.0 | ||
 |
 |
H12 | 1.8 | ||
 |
H13 | 2.15 | |||
 |
H14 | 2.9 | |||
 |
H14B | 5.0 | |||
| Flat End Taper |  |
H18 | 1.0 | 1.6 | 4.6 |
 |
 |
H19 | 1.3 | 2.1 | 7.7 |
 |
H26 | 1.7 | 2.1 | 4.6 | |
| *Total Length for shank 2.35 mm IS 48.5 mm |  |
H27* | 2.5 | 3.3 | 9.2 |
| Flame |  |
H25 | 1.8 | 8.3 | |
 |
|||||
| Wheel |  |
H28 | 5.3 | 0.8 | |
 |
 |
H29 | 5.4 | 2.0 | |
 |
H30 | 6.4 | 2.0 | ||
| Cone |  |
H24 | 2.5 | 6.4 | |
 |
 |
H32 | 5.1 | 4.3 | |
| Inverted Cone |  |
H15 | 1.5 | 1.3 | 1.8 |
 |
 |
H16 | 2.6 | 2.1 | 2.3 |
 |
H17 | 2.3 | 1.9 | 6.2 | |
| Cylindrical |  |
H20 | 1.6 | 4.6 | |
 |
 |
H21 | 1.9 | 5.0 | |
 |
H22 | 2.5 | 5.2 | ||
 |
H23 | 3.5 | 5.8 | ||
 |
H23B | 4.9 | 7.4 | ||
| Round End Taper |  |
H19R | 2.2 | 1.3 | 10 |
 |
 |
H27R* | 3.3 | 2.6 | 9.4 |
| *Total Length for shank 3 mm is 44.5 mm | |||||
| Knife |  |
H31 | 6.1 | 2.3 | |
 |
|||||
| Inverted Cone |  |
H33 | 6.2 | 3.1 | |
 |
 |
H34 | 8.2 | 3.6 | |
| Inverted Cone |  |
H35 | 6.2 | 3.1 | |
 |
 |
H36 | 8.2 | 3.6 |
Grit Size:
D126 (#120/140).
Remarks:
Other grit sizes are available upon request.
Minimum clamping length = Half of total length: Le=0.5xL.
