pauseplay
/
show/hideshow/hide

Back to Diamond & CBN Internal Grinding Pins

Profile Grinding Pins

STRAUSS & CO.'s Diamond plated tapered pins are ideal for grinding or ripping tungsten carbide drawing dies for the wire and tube industries. It is also used for cold heading dies.

PK Pins for grinding tungsten carbide drawing dies

Cat.No.DTYLα
PK3x8-01 3 19 3 55 8
PK3x10-01 3 15 3 55 10
PK3x12-01 3 13 3 55 12
PK3x15-01 3 10 3 55 15
PK3x20-01 3 8 3 55 20
PK5x8-01 5 34 6 75 8
PK6x10-01 6 33 6 100 10
PK6x12-01 6 27 6 100 12
PK6x14-01 6 23 6 100 14
PK6x16-01 6 20 6 62 16
PK6x20-01 6 16 6 58 20
PK6x30-01 6 10.5 6 52 30
PK1/8 x8-01 1/8 21 1/8 63 8
PK1/8 x10-01 1/8 16 1/8 63 10
PK1/8 x12-01 1/8 14 1/8 63 12
PK1/4 x8-01 1/4 43 1/4 76 8
PK1/4 x10-01 1/4 35 1/4 76 10
PK1/4 x12-01 1/4 29 1/4 76 12
PK3/8 x8-01 3/8 66 1/4 100 8
PK3/8 x10-01 3/8 53 1/4 89 10
PK3/8 x12-01 3/8 44 1/4 76 12


Remarks: Available in D91 (#170/200), D126 (#120/140), D151 (#100/120), D181 (#80/100).
Other sizes and grit sizes are available upon request.
For this type of custom - made shaped pin, please refer to the PK drawing.
Minimum clamping length = Half of total length: Le=0.5xL

PK(2) Conical Grinding Pins

Cat.No.DTYLα
PK6x45-01 6 7 6 60 45
PK6x60-01 6 5 6 60 60
PK6x90-01 6 3 6 60 90
PK8x30-01 8 14.5 6 60 30
PK8x45-01 8 9.5 6 60 45
PK8x60-01 8 6.5 6 60 60
PK8x60-02 8 6.5 3 55 60
PK8x90-01 8 4 6 60 90
PK8x90-02 8 4 3 55 90
PK10x30-01 10 18 6 60 30
PK10x45-01 10 11.2 6 52 45
PK10x60-01 10 8.5 6 50 60
PK10x90-01 10 5 6 45 90
PK12x30-01 12 22 6 64 30
PK12x45-01 12 14 6 55 45
PK12x60-01 12 10 6 60 60
PK12x90-01 12 6 6 46 90
PK15x45-01 15 17.5 6 58 45
PK15x60-01 15 12.5 6 54 60
PK15x90-01 15 7.5 6 48 90
PK20x45-01 20 24 6 64 45
PK20x60-01 20 17 6 58 60
PK20x90-01 20 10 6 50 90
PK30x90-01 30 15 6 55 90


Remarks: Available in D or B91 (#170/200), D or B126 (#120/140), D or B181 (#80/100).
Other sizes and grit sizes are available upon request.
For this type of custom - made shaped pin, please refer to the PK drawing.
Minimum clamping length = Half of total length: Le=0.5xL

PF Flat End Taper Grinding Pins

Cat.No.D1D2TYL
PF3X1-01* 3 1 11.5 6 46
PF4X2-01* 4 2 11.5 6 46
PF5X3-01* 5 3 11.5 6 46
PF6X4-01* 6 4 11.5 6 46
PF7X5-01 7 5 11.5 6 46
PF8X6-01 8 6 11.5 6 46
PF11X9-01 11 9 11.5 6 46
PF12X10-01 12 10 11.5 6 46
PF13X11-01 13 11 11.5 6 46


Remarks: Available in D151 (#100/120). * L1=20.
Other sizes and grit sizes are available upon request.
For this type of custom - made shape pin, please refer to the PF drawing.
Minimum clamping length = Half of total length: Le=0.5xL.

PR Radius Shaped Grinding Pins

Cat.No.DTYLr
PR6X20-01* 6 20 6 60 3.0
PR10X15-01 10 15 6 55 5.0
PR15X30-01 15 30 6 70 7.5


Remarks: Available in D or B91 (#170/200), D or B126 (#120/140), D or B181 (#80/100). *L1=25.
Other sizes and grit sizes are available upon request.
For this type of custom - made shape pin, please refer to the PR drawing.
Minimum clamping length = Half of total length: Le=0.5xL.

PH Inverted Cone Pins

Cat.No.DTYLα
PH12X60-01 12 4 6 44 60
PH20X45-01 20 10 6 50 45
PH20X90-01 20 5 6 45 90
PH30X90-01 30 10 6 50 90


Remarks: Available in D or B91 (#170/200),
D or B126 (#120/140), D or B181 (#80/100).
Other sizes and grit sizes are available upon request.
For this type of custom - made shape pin, please refer to the PH drawing.
Minimum clamping length = Half of total length: Le=0.5xL.

GPR Radius Shaped Grinding Pins

Cat.No.DTYLr
GPR2X4* 2.0 4 2.0 60 0.5
GPR2.5X4 2.5 4 2.0 60 1.0
GPR3X5 3.0 5 2.5 60 1.0
GPR3.5X5 3.5 5 3.0 80 1.0
GPR4.5X6 4.5 6 4.0 80 1.0
GPR5.5X6 5.5 6 5.0 80 1.5
GPR6.5X8 6.5 8 6.0 100 1.5
GPR8.5X10 8.5 10 8.0 100 1.5
GPR10.5X12 10.5 12 10 100 1.5
GPR12X12 12 12 10 100 1.5
GPR15X15 15 15 10 100 1.5


Remarks:
Available in B or D151 (#100/120) *L1=10.
Other sizes and grit sizes are available upon request.
For this type of custom - made shape pin, please refer to the GPR drawing.
Minimum clamping length = Half of total length: Le=0.5xL.