pauseplay
/
show/hideshow/hide

Back to Diamond & CBN Saws

SW Sawing Wheels

Description & Use:
STRAUSS & CO.'s circular saws are employed in sawing materials such as tungsten carbide, hardened steels, fiberglass, ceramics, epoxy and re - inforced plastics. Also widely used for marble cutting.

Grit Size:
Available in:
D or B54 (#270/325), D or B91 (#170/200), D or B126 (#120/140),
D or B181 (#80/100), D or B252 (#60/80), D or B427 (#40/50).

Tolerance:
D= ±2.0 mm, E= ±0.15 mm, H= H7.

Cat.No. Size mm T Size According to Grit
  D E H D/B 30 D/B 54 D/B 91 D/B 126 D/B 181 D/B 252 D/B 427 D/B 602
SW020-0.2-3 20 0.2 3 0.3 0.4 0.5 0.6 0.7 0.9    
SW020-0.3-3 20 0.3 3 0.4 0.5 0.6 0.7 0.8 1    
SW020-0.7-3 20 0.7 6 0.8 0.9 1 1.1 1.2 1.4    
SW025-0.2-3 25 0.2 3 0.3 0.4 0.5 0.6 0.7 0.9    
SW025-0.3-3 25 0.3 3 0.4 0.5 0.6 0.7 0.8 1    
SW030-0.2-3 30 0.2 3 0.3 0.4 0.5 0.6 0.7 0.9    
SW030-0.3-3 30 0.3 3 0.4 0.5 0.6 0.7 0.8 1    
SW030-0.3-6 30 0.3 6 0.4 0.5 0.6 0.7 0.8 1    
SW030-0.5-6 30 0.5 6 0.6 0.7 0.8 0.9 1 1.2    
SW030-0.8-6 30 0.8 6 0.9 1 1.1 1.2 1.3 1.5    
SW030-1.0-6 30 1 6 1.1 1.2 1.3 1.4 1.5 1.7    
SW040-0.2-3 40 0.2 3 0.3 0.4 0.5 0.6 0.7 0.9    
SW040-0.3-3 40 0.3 3 0.4 0.5 0.6 0.7 0.8 1    
SW040-0.5-6 40 0.5 6 0.6 0.7 0.8 0.9 1 1.2    
SW040-1.0-16 40 1 16 1.1 1.2 1.3 1.4 1.5 1.7    
SW050-0.2-3 50 0.2 3 0.3 0.4 0.5 0.6 0.7 0.9    
SW050-0.35-3 50 0.35 3 0.45 0.55 0.65 0.75 0.85 1.05    
SW050-0.5-10 50 0.5 10 0.6 0.7 0.8 0.9 1 1.2    
SW050-1.0-9.52 50 1 9.52 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW050-1.0-10 50 1 10 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW65-0.5-8 65 0.5 8 0.6 0.7 0.8 0.9 1 1.2    
SW065-0.5-10 65 0.5 10 0.6 0.7 0.8 0.9 1 1.2    
SW065-0.8-10 65 0.8 10 0.9 1 1.1 1.2 1.3 1.5    
SW065-0.8-12.7 65 0.8 12.7 0.9 1 1.1 1.2 1.3 1.5    
SW065-2.0-10 65 2 10 2.1 2.2 2.3 2.4 2.5 2.7 3.1 3.5
SW075-0.3-20 75 0.3 20 0.4 0.5 0.6 0.7 0.8 1    
SW075-0.5-20 75 0.5 20 0.6 0.7 0.8 0.9 1 1.2    
SW075-1.0-20 75 1 20 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW080-1.0-10 80 1 10 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW100-0.25-20 100 0.25 20 0.35 0.45 0.55 0.65 0.75 0.95    
SW100-0.5-8 100 0.5 8 0.6 0.7 0.8 0.9 1 1.2    
SW100-0.5-20 100 0.5 20 0.6 0.7 0.8 0.9 1 1.2    
SW100-0.5-22 100 0.5 22 0.6 0.7 0.8 0.9 1 1.2    
SW100-0.5-22.2 100 0.5 22.2 0.6 0.7 0.8 0.9 1 1.2    
SW100-1.0-12 100 1 12 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW100-1.0-20 100 1 20 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW100-1.0-22 100 1 22 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW100-1.0-22.2 100 1 22.2 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW125-0.3-12.7 125 0.3 12.7 0.4 0.5 0.6 0.7 0.8 1    
SW125-0.3-20 125 0.3 20 0.4 0.5 0.6 0.7 0.8 1    
SW-125-1.0-20 125 1 20 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW125-1.0-22 125 1 22 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW125-1.0-22.2 125 1 22.2 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW150-0.3-20 150 0.3 20 0.4 0.5 0.6 0.7 0.8 1    
SW150-1.0-20 150 1 20 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW150-1.0-22 150 1 22 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW150-1.0-22.2 150 1 22.2 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5
SW200-1.0-32 200 1 32 1.1 1.2 1.3 1.4 1.5 1.7 2.1 2.5

 

Remarks:
Other sizes and grit sizes are available. Please refer to the drawing while asking for a quotation.
STRAUSS & CO.'s production capacity for sawing wheels is up to Ø1000 mm.
Slotted sawing wheels are available upon request.

All sawing wheels are available with side pads. Standard size of a pad is 15 mm. 3 pads on each side of the saw. Adding side pads is highly recommended while cutting in depth or while cutting fiberglass and re - inforced plastic.

For calculating the cutting width (size T) please add the following size (per grit) to the blank thickness (size E).

For D or B54 please add 0.2 mm
For D or B91 please add 0.3 mm
For D or B126 please add 0.4 mm
For D or B181 please add 0.5 mm
For D or B252 please add 0.7 mm
For D or B427 please add 1.1 mm

Standard size for "W" is 2.0 mm. Other sizes are available upon request.