Countersink

Description & Use:
STRAUSS & CO.'s countersink is ideal for deburring and chamfering holes in materials such as glass, tungsten carbide, HSS, fiberglass and epoxy, re - inforced plastic and other hard metals (45hrc and harder). The COU25 plated with D252 is specially made and widely used for holes on ceramic surfaces. Range:3.5 mm. - 25.4 mm.

Set Cat. No. COUSET: NB4001ST, COU6D126, COU10D126, COU10D252, COU3.2D126.

Cat. No. COU10

STRAUSS & CO’s fixed diamond coated countersink Ø10.4 mm is ideal for deburring and chamfering holes in materials such as glass, tungsten carbide, HSS and other hard metals. Can also be used for deburring and chamfering material such as re - inforced plastic, fiberglass and epoxy (D252).
Standard grit sizes: D126 (#120/140), D252 (#60/80).
Other grit sizes are available upon request.

Cat. No. COU6

STRAUSS & CO’s fixed diamond coated countersink Ø6.3 mm is ideal for deburring and chamfering holes in materials such as glass, tungsten carbide, HSS and other hard metals.
Standard grit size: D126 (#120/140).
Other grit sizes are available upon request.

Cat. No. COU3.2

STRAUSS & CO’s fixed diamond coated countersink Ø3.5 mm is ideal for horizontal filing jobs. Coated length 15.0 mm.
Standard grit size: D126 (#120/140).
Other grit sizes are available upon request.

Cat. No. COU25

STRAUSS & CO’s fixed diamond coated countersink Ø25 mm is ideal for deburring and chamfering holes in materials such as glass, re - inforced plastic, fiberglass and epoxy.
Standard grit size: D252 (#60/80).
Other grit sizes are available upon request.

Cat. No. COUEX

STRAUSS & CO’s EX. diamond coated roto - drive Ø25 mm is for external chamfering on re - inforced plastic, fiberglass and epoxy.
Standard grit size: D252 (#60/80).
Other grit sizes are available upon request.